Whatever brand you choose to buy your electronic cigarette, it can be difficult to use an electronic cigarette for the first time, as you need to know that vaping, like any other electronic device, is a device you need to understand to ensure you can use an electronic cigarette for the first time.
So, what are the main knowledge areas regarding the setup and use of an electronic cigarette? Here is our practical guide!
Further reading : How to Renovate an Old House?
What is the importance of choosing your e-liquid?
******Before thinking about the setup of your vaporizer, we emphasize that it is very important to carefully select the e-liquid you have added. When choosing your favorite flavor, it is necessary to pay attention to its components, on the one hand, to ensure the greatest respect for your health, but also for your vapor.
Therefore, first check the type of atomizer you have. So, if you are close to M.T.L, your e-liquids should be more concentrated in P.G than V.G. However, if your equipment is closer to sub-ohm, you will be more suited to choose liquids that are more concentrated in V.G rather than P.G.
You may also like : How to Work in Film?
To better understand all of this, it is necessary to go back a bit to Ohm’s law. Therefore, a resistance lower than 1 ohm is generally more suitable for liquids with high V.G, as the latter heats longer and has more time to warm up. And thanks to this heating season, we can exert more power on this type of resistance.
On the contrary, resistances greater than 1 ohm have the ability to heat up more quickly and therefore require less power, and thus the PG e-liquids will perform better.
Your best electronic cigarette setting
Although most e-cigarettes today are equipped with safety systems, it is more than reasonable to choose the right setting for your box for safer use.
Moreover, the setting of your box will also go through the voltage box, which will significantly affect the effects of the e-liquid evaporation. Our essential advice is to always keep your electronic cigarette at a voltage between 3.6 V and 4 V, depending on your feeling.
This makes sense, as the e-liquid deliveries to the resistance of your box are often too high, and this will cause the problem feared by all, namely liquid leakage.
On the other hand, if you decide to change your e-cigarette setting to a higher range than specified, you may face the opposite problem, meaning there will be too low e-liquid absorption at the resistance, and thus, regarding the liquids that need to be vaporized, it causes the phenomenon of “dry hit” that just kills your resistance prematurely.
To summarize everything, we assign a resistance that is:
- 1.5 ohms: power less than 10 watts
- =1 ohm-1.5 ohms: 9-15 watts
- =0.5 ohm-1 ohm: 20-35 watts
- =0.3 ohm-0.5 ohms: 20-60 watts
- =0.15 ohm: 20-100 watts
Other settings for your electronic cigarette
An electronic cigarette is not just about choosing the value of its resistance and voltage. Of course, it all depends on your model of electronic cigarette. It is obvious that it is not the same, depending on whether you have a clearomizer or a rebuildable atomizer where you can manage everything. Now, it also depends on your skills. When you start vaping, it is better to start with a clearomizer that you have to think less about. Once you are used to it, you can think about the atomizer.
If you have a high-quality electronic cigarette for vaping, remember to first choose an e-liquid that is even up to par. This is important to avoid having to change your resistance too often; otherwise, it will get dirty, which will cause liquid leakage and a burnt taste in your mouth. To ease your worries, you can do all your shopping on the Kumulus Vape site. You can also find high-quality electronic cigarettes, such as e-liquids, pre-made resistances, or braids and resistance wires for atomizers.
To add a nebulizer, you need to change and replenish the resistance. It consists of a resistance wire and a wick. For the wick, it will not be too complicated, even if you have several options in front of you, and a poor-quality wick or one that is not soaked enough can have consequences for the premature wear of your resistance. The most classic wick is, of course, cotton, such as Japanese organic cotton and carded cotton for micro-coil users. You can also choose a strand of cellulose fiber or silica (silica). If you do a lot of vaping, prefer the cellulose wick over cotton, as it will last longer over time. You can also choose mesh, which is made of stainless steel. On the other hand, this will require additional handling, as it will need to be oxidized with a flashlight to avoid short circuits that could damage your battery.
This is for choosing the wick after adjusting the voltage of your e-cigarette. The evaporation of the liquid is also related to the resistance wire. In the case of a nebulizer, you will fill it. This resistance wire often comes in the form of a kanthal coil. It is made of chrome, aluminum, and iron. You can choose both the diameter and the number of turns you will make with it. These turns are called turns.
Be careful, but you do not necessarily have the option to insert any type of diameter into your coil. You should also know that your wire will be larger and the lower your strength will be.
The resistance will then heat more strongly and quickly. Therefore, it is not preferable if you like e-liquids with a high vegetable glycerin content. Strongly natural, the diameter also affects the heating of the liquid. The larger the wire, the faster and stronger it heats. They also have a more intense hit in the mouth and quite a bit of vapor. However, your battery may be shorter. If you need samples, specify the following:
- With a resistance wire diameter of 2 mm, your resistance will have a power of 2 ohms if you make 5 turns.
- If you make 10 turns of the same diameter, you will have a power of 3.6 ohms.
Tag: how to properly set your electronic cigarette